|
|
 |
| |
|
|
 |
|
|
| |
|
| Main
Features:- |
- Heavy
duty construction to bear extra load and round
the clock operation of machine.
- Model:
6:4:10 & 6:4:15, i.e., 6 position label
pallets, 4 position gripper drum and 10/15 position
bottle pads/stations for Front/Shoulder or Foil
labels aggregate.
- Pneumatic
pumps for both the aggregates for automatic
glue feeding and recirculation.
- Clutch
to disengage or engage back labelling aggregate
as and when required.
- Bottle
Change Parts made of UHMW. Thus, low noise and
wear/tear resistant.
- No
Bottle- No Glue- No Label.
- Sensors
at Infeed to start gluing on roller & pallets
prior - to actual labelling on bottles.
- Automatic
lubrication pumps for lubrication and circulation
of oil in main rotary table and aggregates and
also other parts of machine.
- labelling
Aggregate/Chamber in oil bath. Thus, less wear
& tear due to permanent lubrication of gears/cams
and other related parts.
- Proximity
sensor with tray at outfeed for "Bottle
Jamming - Machine Stop".
- Stainless
Steel Safety Hood with Acrylic sheets.
- Variable
speed controlled with AC Frequency Drive.
- Electronic BPM Meter, Counter,
Fault Display, Safety Sensors etc. Controlled
with PLSC fitted in machine.
- Pneumatically
controlled Up & Down movement of Foiling
Attachment.
- Up
& Down Movement of Machine by geared motor.
Thus, east adjustment for running different
height of bottles.
- Easy
and fast change over from one size to another
with additional Change Parts.
- Glue
Roller in Stainless Steel and Label Pallets
in Rubber to avoid wear & tear of Glue Roller.
- Inbuilt,
Electrical and Electronic Control Panel.
- Pneumatics
of FAST/FMC make.
- Automatic
controlled glue scrapper which closes when bottle
feed is interrupted.
- Big
Label Magazines to accommodate more quantity
of labels.
- Easy
changeover for label size by replacement of
shaft with pallets instead of only pallets.
Thus, less adjustment and down time.
|
| Options:- |
|
 |
- Ink
Jet Printer can be attached on additional
cost.
|
| Recommendations:- |
- SERVO
Transformer of 3-Phase, 6 KVA, 415 + 1%
for uniform power supply.
- Better
Quality/Properly packed Foils and Labels.
- Die
cut uniform labels with proper grain directions.
- Moisture
free and filtered compressed air.
- Humidity
free surroundings.
- Better
quality of glue
|
|
|
|
| |
|
|
|
|
|
|
|
